ET/PCISYNC

PCI Plug-in with 4 T1/E1 Capable Ports to 10Mb/s Each

ET/PCISYNC Adapter

The ET/PCISYNC adapter adds 1 or 4 T1/E1 speed capable ports to PC-based routers. All ports can run up to 10Mb/s simultaneously, making the ET/PCISYNC the fastest T1/E1 PCI plug-in card on the market today. The ET/PCISYNC 32-bit PCI architecture utilizes single-cycle bus-mastering technology to maximize throughput and efficiency and incorporates the same high performance technology used on our dual port HSSI card. It very well may be the fastest quad T1/EI board you can buy.

Software Drivers

Emerging Technologies provides full software support for running Frame Relay, Cisco HDLC and PPP. This allows a PC with an ET/PCISYNC installed to connect directly to any other standard router (such as Cisco Systems) via point to point line or Frame Relay network.

Electrical Interfaces

V.35, EIA-530, X.21 and RS-232 (V.24)

Supported Platforms

Drivers for the following O/S are available:

FreeBSD v4.x
Linux v2.2.18, v2.4.5, 2.4.12, 2.4.17, 2.4.19

Full Software Support

Emerging Technologies wrote the drivers for the products we sell, and we fully support them. Our competitors use public code, so if you have problems you are on your own. Our feature rich drivers are field tested in some of the most demanding environments you will ever encounter. If you have problems you need help from professionals that fully understand the product, the technology and the code. Don't trust your multiport T1 router to public code, much of which were written by individuals with little knowledge of the protocols involved.

Features

Our software for the ET/PCISYNC provides the most powerful features available anywhere:

• Aggregate throughput to 40Mb/s
• 4 Full T1/E1 Capable Ports
• 20 T1 / E1 Ports Per PC
• Half Size Card
• High Performance Burst Bus-Mastering Design
• Physical MTUs to 5000 bytes (to handle Cisco's 4770 MTU)
• Fully SNMP and gateD compatible interfaces
• Built-in Bandwidth Management
• Load Balancing on any number of T1 lines.
• Full-feature Frame Relay
• Frame Relay Bridging (ala ADSL)
• Satellite Compatible on both Cisco HDLC and Frame Relay
• Direct Connect Compatible with all Cisco Routers
• Built-in Statistical Monitoring with Graphical Display
• Integrated Debugger
• Unlimited Receive Buffers
• Simple Configuration
• Highest Performance Hardware / Software Design
• Months of uptime in busy ISP environments
• Full Product Support

Cost Savings

With a list price of $695. (1 port) to $1295. (4 Ports) you can build a multiport router for significantly less with a standard PC. Discounts are available for ISPs, resellers and OEMs.

Availability

ET/PCISYNC is now shipping (since May '99)

Part Numbers and List Prices

Return To Home Page